Contact
PRODUCTS |
SOLUTIONS |
Government
Data Center Monitoring
Network Equipment Manufacturing
Service Provider Testing
Storage Equipment Testing
Enterprise Networked Applications
RESOURCES |
ORDERING |
CUSTOMERS |
Enterprise
Government & Education
Network Equipment Manufacturers
Systems Integrator
Storage Equipment Manufacturers
Service Providers
ABOUT
RESOURCES
Whitepaper
Case Studies
Data Sheet
Product Spotlight
FREE Network Profiler Tool.LEARN MORE »
TESTIMONIAL
The Anue Network Emulator is precise and controllable and is a key part of our lab network testing.".
— Dr. Kei Hiraki
Professor, University of Tokyo
Current Internet2 Land
Speed Record holder
SONET/SDH Signal Delay
Anue SONET/SDH Signal Delay WAN Simulators are ideal for
testing transport solutions in a lab environment. SONET/SDH Signal Delay WAN Simulators can reproduce the delay and impairments experienced by SONET/SDH signals across MANs and WANs.
Does your solution:
- Work properly in the presence of delay?
- Handle bit errors?
- Detect and respond properly to LOS/LOF alarms?
Anue SONET/SDH Signal Delay WAN Simulators:
- Run 100% line rate traffic 155Mbps to 10Gbps
- Can be automated or operated interactively, locally or remotely
- Are accurate down to one-bit time increments
- Provide delay of 250ms or more at all bit rates
Maui and Hawaii WAN Simulator Hardware Platform
The SONET/SDH Signal Delay WAN Simulator is available on a 2U rack-mount chassis that supports up to 7 software loads. There are two platforms available:
- The Maui platform supports up to four blades and data rates up to 2.6Gbps.
- The Hawaii platform supports up to two blades and data rates up to 11.3Gbps.
Supported Rates
- OC-3/STM-1 (155.52Mbps)
- OC-12/STM-4 (622.08Mbps)OC-48/STM-16 (2.488Gbps)
- OC-192/STM-64 (9.953Gbps)
Delay
- Insert up to 4sec delay at OC-3 rates, 1sec delay at OC12 rates, and 250ms delay at OC48 rates.
- Introduce delay with no pointer movements and no modification of TOH, POH or payload bytes.
- Increase maximum delay with a Delay Doubler and Quadrupler (even greater delay amounts are available upon request)
Error
- Set error rates from 10-12 to 10-2.
- Inject errors at a fixed rate (periodic) or randomly with a Uniform, Poisson or Gaussian distribution.
- Error 1 bit, 32 contiguous bits or a 32-bit user-defined error pattern.
- Simulate loss of signal, loss of frame and/or squelch mode under user or program control.
Operation
- Configure via a front panel LCD control for standalone operation
- Configure remotely via an Ethernet control port
- Interactive: Browser-based GUI with save/load capability
- Automated: Powerful TCL script library
SONET/SDH Signal Delay Software Loads for the Maui and Hawaii Platform
SW Load |
Description |
HW Platform |
Std Delay (per direction) |
DG312 |
Network Emulator for SONET/SDH Testing, OC-3/STM-1 (155.52Mbps) and OC-12/STM-4 (622.08Mbps) |
Maui, Hawaii |
4s/1s |
DG48 |
Network Emulator for SONET/SDH Testing, OC-48/STM-16 (2.488Gbps) |
Maui, Hawaii |
250ms |
DG192 |
Network Emulator for SONET/SDH Testing, OC-192/STM-64 (9.953Gbps) |
Hawaii |
250ms |
Note: Up to 7 software loads for different protocols (SONET, OTN, Ethernet, Fibre Channel, CPRI) can be combined on the same system. A combo WAN Simulator can easily switch between different features, data rates and protocols, simplifying testing and leveraging your investment. [view Network Emulator Combo products]